Power Walk-In Function Does Not Operate

POWER WALK-IN FUNCTION DOES NOT OPERATE





Diagnosis Procedure
1.CHECK POWER WALK-IN FUNCTION
Check power walk-in function. System Description.
Is the inspection result normal?
YES - Power walk-in function is OK.
NO - GO TO 2.
2.PERFORM INITIALIZATION PROCEDURE
1. Perform initialization procedure. Special Repair Requirement.
2. Check power walk-in function. System Description.
Is the inspection result normal?
YES - Power walk-in function is normal.
NO - GO TO 3.
3.CHECK POWER WALK-IN SWITCH
Check power walk-in switch. Power Walk-In Switch.
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace the malfunctioning parts.
4.CHECK SEAT BELT BUCKLE SWITCH
Check seat belt buckle switch. Seat Belt Buckle Switch.
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5.CHECK FORWARD SWITCH
Check forward switch. Forward Switch.
Is the inspection result normal?
YES - GO TO 6.
NO - Repair or replace the malfunctioning parts.
6.CHECK SLIDING LIMIT SWITCH
Check sliding limit switch. Sliding Limit Switch.
Is the inspection result normal?
YES - GO TO 7.
NO - Repair or replace the malfunctioning parts.
7.CHECK DRIVER SIDE DOOR SWITCH
Check driver side door switch. Door Switch
Is the inspection result normal?
YES - GO TO 8.
NO - Repair or replace the malfunctioning parts.
8.CONFIRM THE OPERATION
Check the operation again.
System Description.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.