Special Repair Requirement

INSPECTION AND ADJUSTMENT


MEMORY STORING : Special Repair Requirement


Memory Storage Procedure
Two positions for the driver seat, steering column and outside mirror can be stored for memory operation by following procedure.
1.STEP 1
Shift AT selector lever to P position (AT model) or applied parking brake (MT model).
- GO TO 2.
2.STEP 2
Turn ignition switch ON.
- GO TO 3.
3.STEP 3
Adjust driver seat, steering column and outside mirror position manually.
- GO TO 4.
4.STEP 4
1. Push set switch.

NOTE:
- Memory indicator for which driver seat position is already retained in memory is illuminated for 5 seconds.
- Memory indicator for which driver seat position is not retained in memory is illuminated for 0.5 second.
2. Push the memory switch (1 or 2) for at least 1 second within 5 seconds after pushing the set switch.

NOTE:
If memory is stored in the same memory switch, the previous memory will be deleted.
Do you need linking of Intelligent Key?
YES - GO TO 6.
NO - GO TO 5.
5.STEP 5
Confirm the operation of each part with memory operation.
- END
6.STEP 6
Turn ignition switch OFF (LOCK).
- GO TO 7.
7.STEP 7
- Press and release set switch. Memory switch indicator is illuminated for 5 seconds. During memory switch indicator is illuminated, press Intelligent Key unlock button while pressing memory switch 1 or 2.

NOTE:
Memory switch indicator lamp blinks for 5 seconds when registration is complete.
- GO TO 8.
8.STEP 8
Confirm the operation of each part with memory operation and Intelligent Key interlock operation.
- END