Work Procedure

ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL


Work Procedure

1.PERFORM INITIALIZATION WITHOUT CONSULT-III
Perform initialization without CONSULT-III. Work Procedure.
- GO TO 2.
2.PERFORM INITIALIZATION FOR FRONT POWER WINDOW
Perform initialization for front power window. Description Special Repair Requirement Description, "ADDITIONAL SERVICE WHEN REMOVING
BATTERY NEGATIVE TERMINAL : Special Repair Requirement".
- GO TO 3.
3.CHECK RETRACTABLE HARD TOP OPERATION
Check retractable hard top operation.
Does it operate normally?
YES - WORK END
NO - GO TO 1.