Removal And Installation

ROOF LOCK ASSEMBLY


ROOF LATCH MOTOR : Removal and Installation


REMOVAL

CAUTION:
Protect the rear fender with a fender protector.

NOTE:
Operate roof manually if it does not operate electrically. .
1. Remove roof lock assembly. Removal And Installation.
2. Remove retaining plate, and then remove roof latch motor shaft.
3. Disconnect roof latch motor harness connector.
4. Remove mounting bolt, and then remove roof latch motor.

INSTALLATION
Install in the reverse order of removal.

NOTE:
- Perform initialization according to the work after installing roof latch motor. Description.
- Adjust door glass and quarter window glass. Procedures.
- Perform water leakage test. Water Leakage Test.