Keyless Entry Transmitter: Testing and Inspection

INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE





Diagnosis Procedure
1.CHECK "LO- BATT OF KEY FOB WARN" SETTING IN "WORK SUPPORT"
Check "LO- BATT OF KEY FOB WARN" setting in "WORK SUPPORT". Intelligent Key.
Is the inspection result normal?
YES - GO TO 2.
NO - Set "LO- BATT OF KEY FOB WARN" setting in "WORK SUPPORT".
2.CHECK INTELLIGENT KEY
Check Intelligent Key. Intelligent Key.
Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace the malfunctioning parts.
3.CHECK INSIDE KEY ANTENNA
Check inside key antenna.
- Instrument center: B2621.
- Console: B2622.
- Trunk room: B2623.
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace the malfunctioning parts.
4.CHECK COMBINATION METER DISPLAY FUNCTION
Check combination meter display function. Combination Meter Display Function.
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.