Removal and Installation

SIDE OIL SEAL


RIGHT SIDE : Removal and Installation


REMOVAL
1. Remove the front drive shaft. Exploded View.





2. Remove the side oil seal using a puller (A) [SST: KV381054S0
(J-34286)].

CAUTION:
Never damage gear carrier.

INSTALLATION
1. Apply multi-purpose grease to sealing lips of side oil seal.





2. Using the drift (A) [SST: ST33400001 (J-26082)], press-fit side oil seal so that its surface comes face-to-face with the end surface of the side retainer.

CAUTION:
- Never reuse oil seal.
- When installing, never incline oil seal.
3. Install the front drive shaft. Exploded View.
4. When oil leaks while removing, check oil level after the installation. Inspection.