Removal and Installation

REAR PARCEL SHELF FINISHER


Removal and Installation


REMOVAL
1. Remove trunk front finisher upper (without REAR SPOILER). Removal and Installation.





2. Disconnect high-mounted stop lamp harness connector (A).
(without REAR SPOILER)
3. Remove rear seat cushion and rear seatback. Removal and Installation.
4. Remove rear side finisher and rear pillar finisher. Removal and Installation.





5. Remove rear parcel shelf finisher fixing clips (A).
6. Remove rear seat striker cover fixing pawls, and then remove rear seat striker cover.
7. Pull rear parcel shelf finisher, and then remove rear parcel shelf finisher.
8. Remove the following parts after removing rear parcel shelf finisher.
- Child anchor cover.
- Rear speaker grille.
- High-mounted stop lamp (without REAR SPOILER). Removal and Installation.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
Check that clips are securely fitted in panel holes on body when installing, and then press them in.