Seat Belt Warning Lamp Does Not Turn On

SEAT BELT WARNING LAMP DOES NOT TURN ON


Diagnosis Procedure

1.CHECK SELF-DIAGNOSIS RESULT
Perform "COMBINATION METER" self-diagnostic result. Testing and Inspection
Is DTC detected?
YES - Repair or replace the malfunctioning parts.
NO - GO TO 2.
2.CHECK POWER SUPPLY
Check that fuses are not blown.
Check ignition power supply of combination meter. Power Supply and Ground Circuit
Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace the malfunctioning parts.
3.CHECK SEAT BELT BUCKLE SWITCH (DRIVER SIDE)
Check seat belt buckle switch (driver side). Component Function Check
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace the malfunctioning parts.
4. .CHECK SEAT BELT BUCKLE SWITCH (PASSENGER SIDE)
Check seat belt buckle switch (passenger side). Component Function Check
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5. .CHECK SEAT BELT WARNING LAMP CIRCUIT
Check seat belt warning lamp circuit. Seat Belt Warning Lamp Circuit
Is the inspection result normal?
YES - GO TO 6.
NO - Repair or replace the malfunctioning parts.
6.CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.