FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Removal and Installation





TRANSMITTER


Removal and Installation


REMOVAL
1. Deflate tire. Unscrew transmitter retaining nut and allow transmitter to fall into tire.





2. Gently bounce tire so that transmitter falls to bottom of tire.
Place on tire changing machine and break both tire beads ensuring that the transmitter remains at the bottom of the tire.





3. Turn tire so that valve hole is at bottom and bounce so that transmitter (1) is near valve hole. Carefully lift tire onto turntable and position valve hole (and transmitter) 270 degree from mounting/dismounting head (2).
4. Lubricate tire well and remove first side of the tire. Reach inside the tire and remove the transmitter.

INSTALLATION





1. Put first side of tire onto rim.
2. Mount transmitter on rim and tighten nut.

CAUTION:
Speed for tightening nut should be less than 10 rpm.





3. Place wheel on turntable of tire machine. Ensure that transmitter
(1) is 270 degree from mounting head (2) when second side of tire is fitted.

NOTE:
Do not touch transmitter at mounting head.
4. Lubricate tire well and fit second side of tire as normal. Ensure that tire does not rotate relative to rim.
5. Inflate tire and fit to appropriate wheel position.