Selective Unlock Function Does Not Operate

SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE


Diagnosis Procedure

1.CHECK "DOOR LOCK�UNLOCK SET" SETTING IN "WORK SUPPORT"
Check "DOOR LOCK-UNLOCK SET" setting in "WORK SUPPORT". CONSULT-III Function (BCM - Door Lock).
Is the inspection result normal?
YES - GO TO 2.
NO - Set "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT".
2.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.