Removal and Installation

HOOD


HOOD ASSEMBLY : Removal and Installation


CAUTION:
Operate with two workers, because of its heavy weight.

REMOVAL
1. Support the hood lock assembly with a proper material to prevent it from falling.

WARNING:
Body injury may occur if no supporting rod is holding the hood open when removing the hood stay.
2. Remove the hood hinge cover (LH/RH).
3. Remove the washer nozzle and washer tube. Service and Repair.
4. Remove the stud balls on the hood stays at the hood side.
5. Remove the hinge mounting nuts on the hood to remove the hood assembly.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- Before installing hood hinge, apply anticorrosive agent onto the mounting surface of the vehicle body.
- After installing, perform hood fitting adjustment. Adjustments.
- After installing, perform front washer nozzle and tube inspection and adjustment. Testing and Inspection.