Base Audio

AV CONTROL UNIT


Removal and Installation


REMOVAL

CAUTION:
Before replacing AV control unit, perform "READ CONFIGURATION" to save or print current vehicle specification. For details, Base Audio.
1. Remove display unit. Base Audio.
2. Remove AV control unit with a unified meter and A/C amp. as a single unit from the body.
3. Remove bracket screws, and then remove AV control unit.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- Since AV control unit connector and unified meter and A/C amp. connector have the same form, be careful not to insert them wrongly.
- Be sure to perform "WRITE CONFIGURATION" when replacing AV control unit.