Base Audio

CONFIGURATION (AV CONTROL UNIT)


Work Procedure


NOTE:
If "WRITE CONFIGURATION" is unsuccessful, perform "Accessory Number Initialization". For details, Base Audio.
After performing "Accessory Number Initialization", reboot the AV control unit to perform "WRITE CONFIGURATION".
1.WRITING MODE SELECTION
CONSULT-III Configuration
Select "CONFIGURATION" of "MULTI AV".
When writing saved data-GO TO 2.
When writing manually-GO TO 3.
2.PERFORM "WRITE CONFIGURATION-CONFIG FILE"
CONSULT-III Configuration
Perform "WRITE CONFIGURATION-Config file".
- WORK END
3.PERFORM "WRITE CONFIGURATION-MANUAL SELECTION"
CONSULT-III Configuration
Select "WRITE CONFIGURATION-Manual selection" to write vehicle specifications into the AV control unit.
For data to write, Base Audio.
- GO TO 4.
4.OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.
- WORK END