Tilt and Telescopic Switch Ground Circuit

TILT &TELESCOPIC SWITCH GROUND CIRCUIT


Diagnosis Procedure

1.CHECK POWER TILT & TELESCOPIC SWITCH GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect power tilt & telescopic switch connector.
3. Check continuity between power seat switch connector and ground.





Is the inspection result normal?
YES - GO TO 2.
NO - Repair or replace harness.
2.CHECK POWER TILT & TELESCOPIC SWITCH INTERNAL CIRCUIT
Check tilt switch. Component Inspection.
Is the inspection result normal?
YES - GO TO 3.
NO - Replace tilt & telescopic switch. Removal and Installation.
3.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- INSPECTION END