Vehicle Security Alarm Does Not Activate

VEHICLE SECURITY ALARM DOES NOT ACTIVATE


Description

Alarm does not operate when alarm operating condition is satisfied.

NOTE:
Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.

CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
"SECURITY ALARM SET" in "WORK SUPPORT" of "THEFT ALM" is ON when setting on CONSULT-III.




VEHICLE SECURITY ALARM DOES NOT ACTIVATE


Diagnosis Procedure

1.CHECK DOOR SWITCH
Check door switch. Component Function Check.
Is the inspection result normal?
YES - GO TO 2.
NO - Replace the malfunctioning door switch
2.CHECK HOOD SWITCH
Check hood switch. Component Function Check.
Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace the malfunctioning parts.
3.CHECK HEADLAMP FUNCTION
Check headlamp function. Component Function Check.
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace the malfunctioning parts.
4.CHECK HORN FUNCTION
Check horn function. Electrical Diagrams.
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.