Security Indicator Lamp Does Not Turn on or Flash

SECURITY INDICATOR LAMP DOES NOT TURN ON OR FLASH


Description

Security indicator lamp does not blink when ignition switch is in a position other than ON

NOTE:
- Before performing the diagnosis, check "Work Flow". Work Flow.
- Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.

Conditions of Vehicle (Operating Conditions)
- Intelligent Key is not inserted in key slot.
- Ignition switch is not in the ON position.




SECURITY INDICATOR LAMP DOES NOT TURN ON OR FLASH


Diagnosis Procedure

1.CHECK SECURITY INDICATOR LAMP
Check security indicator lamp. Component Function Check.
Is the inspection result normal?
YES - GO TO 2.
NO - Repair or replace the malfunctioning parts.
2.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.