Description

INSPECTION AND ADJUSTMENT


ECM RE-COMMUNICATING FUNCTION ECM RE-COMMUNICATING FUNCTION : Description

Performing the following procedure can automatically activate recommunication of ECM and BCM, but only when the ECM is replaced with a new one*.
*: New one means a virgin ECM that is never energized on-board.
(In this step, initialization procedure by CONSULT-III is not necessary)

NOTE:
- When registering new Key IDs or replacing the ECM that is not brand new, refer to CONSULT-III Operation Manual NATS-IVIS/NVIS.
- If multiple keys are attached to the key holder, separate them before beginning work.
- Distinguish keys with unregistered key IDs from those with registered IDs.