Front

DIFFERENTIAL GEAR OIL


Changing Differential Gear Oil


DRAINING
1. Stop engine.





2. Remove drain plug (1) and drain gear oil.
3. Set a gasket on drain plug (1) and install it to final drive assembly and tighten to the specified torque. Refer to Front Final Drive Assembly.

CAUTION:
Never reuse gasket.

FILLING
1. Remove filler plug (1). Fill with new gear oil until oil level reaches the specified level near filler plug mounting hole.






Oil grade and Viscosity
Oil capacity: Approx. 0.65 l (1-3/8 US pt, 1-1/8 Imp pt)

2. After refilling oil, check oil level. Set a gasket to filler plug (1), then install it to final drive assembly.

CAUTION:
Never reuse gasket.