Overhaul

STEERING COLUMN


Disassembly and Assembly


COMPONENTS





DISASSEMBLY
1. Remove fixing screws of telescopic sensor, and then remove telescopic sensor from steering column.
2. Remove fixing screw of bracket, and then remove bracket from telescopic motor.
3. Remove fixing bolt of telescopic motor, and then remove telescopic motor from steering column.
4. Remove fixing screws of tilt sensor, and then remove tilt sensor from steering column.
5. Remove fixing bolt of tilt motor, and then remove tilt motor from steering column.
6. Remove fixing screws of brackets, and then remove brackets from steering column.

INSPECTION AFTER DISASSEMBLY
Check component parts for damage or other malfunctions. Replace if there are.

ASSEMBLY
Assembly is the reverse order of disassembly. For tightening torque, refer to "COMPONENTS".

INSPECTION AFTER ASSEMBLY
Check tilt and telescopic mechanism operating range L1, L2 as shown in the figure.






Standard
Tilt operating range "L1" : Refer to Specifications.
Telescopic operating range "L2"" : Refer to Specifications.