Warning Lamp and Indicator Lamp Circuit

TROUBLE DIAGNOSIS FOR SYSTEM


Warning Lamp and Indicator Lamp Circuit


INSPECTION PROCEDURE
1.CHECK SELF-DIAGNOSIS RESULTS
Perform ABS actuator and electric unit (control unit) self-diagnosis.
OK or NG
OK - GO TO 2.
NG - Check items displayed by self-diagnosis. Refer to Scan Tool Testing and Procedures.
2.CHECK COMBINATION METER
Check the indication and operation of combination meter are normal. Refer to Self-Diagnosis Mode of Combination Meter.
OK or NG
OK - INSPECTION END
NG - Combination meter is malfunctioning. Repair or replace combination meter. Refer to System Description.
NG - Combination meter is malfunctioning. Repair or replace combination meter. Refer to System Description.