Without 4WAS

DIAGNOSIS AND REPAIR WORK FLOW


Work Flow


DETAILED FLOW
1.COLLECT THE INFORMATION FROM THE CUSTOMER
It is also important to clarify customer complaints before inspection. First of all, reproduce symptoms, and understand them fully. Ask customer about his/her complaints carefully. In some cases, it is necessary to check symptoms by driving vehicle with customer.

CAUTION:
Customers are not professional. It is dangerous to make an easy guess like "maybe the customer means that...," or "maybe the customer mentions this symptom".
- GO TO 2.
2.CHECK THE STATUS
1. Power steering fluid leakage and check the power steering fluid level. Refer to Service and Repair.
2. Check the drive belt tension. Refer to Checking.
3. Check the power steering gear for damages, cracks and fluid leakage. Refer to Service and Repair.
4. Check the relief oil pressure. Refer to For Models Without 4WAS And Models Except Sport Models, "FOR MODELS WITHOUT 4WAS AND MODELS EXCEPT SPORT MODELS : Inspection".
- GO TO 3.
3.DIAGNOSIS CHART BY SYMPTOM
Perform the diagnosis by symptom. Refer to Without 4WAS.
- GO TO 4.
4.FINAL CHECK
Check the input/output standard values for the power steering control unit.
Are the power steering control unit input/output values within standard ranges respectively?
YES - INSPECTION END
NO - GO TO 2.