Without 4WAS

POWER STEERING SOLENOID VALVE


Component Inspection

1.CHECK POWER STEERING SOLENOID VALVE
1. Turn the ignition switch OFF.
2. Disconnect power steering solenoid valve harness connector.
3. Check the resistance between power steering solenoid valve connector terminals.





4. Check the power steering solenoid valve connector by listening for its operation sound while applying battery voltage to power steering solenoid valve connector F45 terminals 1 (positive) and 2 (negative).
Is the inspection result normal?
YES - INSPECTION END
NO - Replace gear-sub assembly. Refer to Exploded View (2WD), Exploded View (AWD).