Rear Subframe: Testing and Inspection

REAR SUSPENSION MEMBER


Inspection


INSPECTION AFTER REMOVAL
Check front suspension member for deformation, cracks, or any other damage. Replace if necessary.

INSPECTION AFTER INSTALLATION
- Check wheel alignment. Refer to Testing and Inspection.
- Adjust neutral position of steering angle sensor. Refer to Description Special Repair Requirement Description Special Repair Requirement, "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION : Special Repair Requirement".
- Adjust parking brake operation (stroke). Parking Brake System Pedal Type (pedal type), Parking Brake System Lever Type (lever type).