System Specifications

Timing cover
M10 bolts : 1, 2, 3, 4, 5, 6, 7 55.0 Nm (5.6 kg-m, 41 ft-lb)
M6 bolts : Except the above 12.7 Nm (1.3 kg-m, 9 ft-lb)
- After all bolts are tightened, retighten them to the specified torque in numerical order shown in the figure.





Chain tensioner 8.1 Nm (0.83 kgm, 72 in lbs)

Crankshaft pulley 44.1 Nm (4.5 kg-m, 33 ft-lb)
Tighten the bolt 90 degrees