Inspection

ACCELERATOR CONTROL SYSTEM


Inspection


INSPECTION AFTER INSTALLATION
- Check accelerator pedal moves smoothly within the whole operation range when it is fully depressed and released.
- Check accelerator pedal securely returns to the fully released position.
- For the electrical inspection of accelerator pedal position sensor, refer to P2122, P2127 and P2138.
- CAUTION:
When harness connector of accelerator pedal position sensor is disconnected, perform "Accelerator
Pedal Released Position Learning". Refer to Description Special Repair Requirement Description Special Repair Requirement Description Special Repair Requirement, "ACCELERATOR PEDAL RELEASED POSITION LEARNING : Description".