Disassembly and Assembly

FRONT COMBINATION LAMP


Disassembly and Assembly


DISASSEMBLY
1. Rotate the resin cap counterclockwise and unlock it.
2. Rotate the xenon bulb socket counterclockwise and unlock it.
3. Remove the retaining spring lock. Remove the xenon bulb.
4. Remove the bumper bracket.
5. Rotate the parking lamp bulb socket counterclockwise and unlock it.
6. Remove the bulb from the parking lamp bulb socket.
7. Rotate the front turn signal lamp bulb socket counterclockwise and unlock it.
8. Remove the bulb from the front turn signal lamp bulb socket.
9. Rotate the side marker lamp bulb socket counterclockwise and unlock it.
10. Remove the bulb from the side marker lamp bulb socket.
11. Rotate the resin cap counterclockwise and unlock it.
12. Disconnect front fog lamp bulb terminals.
13. Remove the retaining spring lock. Remove the bulb.

ASSEMBLY
Assemble in the reverse order of disassembly.

CAUTION:
- After installing the bulb, install the resin cap and the bulb socket securely for watertightness.
- After installation, check that headlamp lighting. Refer to Inspection After Installation.