Hazard and Buzzer Reminder Does Not Operate

HAZARD AND BUZZER REMINDER DOES NOT OPERATE


Diagnosis Procedure

1.CHECK "HAZARD ANSWER BACK" SETTING IN "WORK SUPPORT"
Check "HAZARD ANSWER BACK" setting in "WORK SUPPORT". Refer to Intelligent Key.
Is the inspection result normal?
YES - GO TO 2.
NO - Set "HAZARD ANSWER BACK" in "WORK SUPPORT".
2.CHECK "ANS BACK I-KEY LOCK" SETTING IN "WORK SUPPORT"
Check "ANS BACK I-KEY LOCK" setting in "WORK SUPPORT". Refer to Intelligent Key.
Is the inspection result normal?
YES - GO TO 3.
NO - Set "ANS BACK I-KEY LOCK" in "WORK SUPPORT".
3.CHECK "ANS BACK I-KEY UNLOCK" SETTING IN "WORK SUPPORT"
Check "ANS BACK I-KEY UNLOCK" setting in "WORK SUPPORT". Refer to Intelligent Key.
Is the inspection result normal?
YES - GO TO 4.
NO - Set "ANS BACK I-KEY UNLOCK" in "WORK SUPPORT".
4.CHECK POWER POSITION
Check if ignition switch position is changing or not.
Does ignition switch position change?
YES - GO TO 5.
NO - Check BCM for DTC. Refer to Testing and Inspection.
5.CHECK DOOR SWITCH
Check door switch. Refer to Component Function Check.
Is the inspection result normal?
YES - GO TO 6.
NO - Repair or replace the malfunctioning parts.
6.CHECK HAZARD FUNCTION
Check hazard function. Refer to Component Function Check.
Is the inspection result normal?
YES - GO TO 7.
NO - Repair or replace the malfunctioning parts.
7.CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer. Refer to Component Function Check.
Is the inspection result normal?
YES - GO TO 8.
NO - Repair or replace the malfunctioning parts.
8.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - GO TO 1.