Open Function

TRUNK LID AUTO CLOSURE SYSTEM DOES NOT OPERATE


OPEN FUNCTION : Description

Trunk lid auto closure system does not operate when trunk lid opening operation is performed.




TRUNK LID AUTO CLOSURE SYSTEM DOES NOT OPERATE


OPEN FUNCTION : Diagnosis Procedure

1.CHECK STRIKER SWITCH
Check striker switch. Refer to Component Function Check.
Is the inspection result normal?
YES - GO TO 2.
NO - Repair or replace the malfunctioning parts.
2.REPLACE TRUNK CLOSURE CONTROL UNIT
- Replace trunk closure control unit.Refer to Removal and Installation.
- Confirm the operation after replacement.
Is the result normal?
YES - INSPECTION END
NO - Check intermittent incident. Refer to Intermittent Incident.