Disassembly and Assembly

CENTER CONSOLE ASSEMBLY


Disassembly and Assembly


CAUTION:
When disassembling, always use a remover tool that is made of plastic.

DISASSEMBLY AND ASSEMBLY OF CENTER CONSOLE (A/T MODELS)

Disassembly
1. Remove screws of console finisher assembly back side, and remove ashtray (front portion).
2. Remove rear upper console assembly. Refer to Removal and Installation.
3. Remove screws and remove cup holder assembly.
4. Remove screws and remove console front bracket.
5. Remove console mask. Refer to Removal and Installation.
6. Remove console lid fixing screws and remove console lid.
7. Remove metal clips and remove console rear finisher. Refer to Removal and Installation.
8. Remove console ashtray.
9. Remove screw and remove console ashtray bracket.
10. Remove console pocket from center console assembly.
11. Remove auxiliary input jacks, socket knob, and cigarette lighter case.

Assembly
Assemble in the reverse order of disassembly.

DISASSEMBLY AND ASSEMBLY OF CENTER CONSOLE (M/T MODELS)

Disassembly
1. Remove screws of console finisher assembly back side, and remove ashtray (front portion).
2. Remove coin pocket. Refer to Removal and Installation.
3. Remove console mask. Refer to Removal and Installation.
4. Remove console lid fixing screws and remove console lid.
5. Remove metal clips and remove console rear finisher. Refer to Removal and Installation.
6. Remove console ashtray.
7. Remove screw and remove console ashtray bracket.
8. Remove screws and remove cup holder assembly.
9. Remove auxiliary input jacks, socket knob, and cigarette lighter case.
10. Remove console sub harness.

Assembly
Assemble in the reverse order of disassembly.