C1717

C1716, C1717, C1718, C1719 TRANSMITTER





Description
The transmitter integrated with a valve is installed on a wheel, and transmits a detected tire pressure signal by radio wave.




DTC Logic

DTC DETECTION LOGIC






DTC CONFIRMATION PROCEDURE
1.DTC REPRODUCTION PROCEDURE
With CONSULT-III
1. Drive for 3 minutes at a speed of 40 km/h (25 MPH) or more, then drive normally for 10 minutes.
2. Perform BCM (AIR PRESSURE MONITOR) self-diagnosis.
Is DTC "C1716", "C1717", "C1718", "C1719" detected?
YES - Perform trouble diagnosis. Refer to C1716.
NO - INSPECTION END




Diagnosis Procedure
1.CHECK TIRE PRESSURE
Check the internal pressure of all wheels. Refer to [1][2]Specifications.
Is the inspection result normal?
YES - Replace the DTC-detected malfunctioning transmitter. Refer to Exploded View.
NO - After adjusting the tire pressure, GO TO 2.
2.CHECK TIRE PRESSURE SIGNAL
With CONSULT-III
1. Check and adjust the tire pressure for all wheels. Refer to [1][2]Specifications.
2. Perform transmitter ID registration for all wheels. Refer to Special Repair Requirement.
3. Drive for 3 minutes at a speed of 40 km/h (25 MPH) or more, then drive normally for 10 minutes.
4. On "DATA MONITOR", select "AIR PRESS FL", "AIR PRESS FR", "AIR PRESS RR" and "AIR PRESS
RL", and check that the tire pressures match the standard value.

CAUTION:
Stop the vehicle and within 15 minutes, use CONSULT-III "DATA MONITOR" to display the tire pressure for all wheels.
5. Check that "DATA MONITOR" displays tire pressure of 438.60 kPa (63.60 Psi).
Is the inspection 438.60 kPa (63.60 Psi)?
YES - Replace transmitter the tire pressure 438.60 kPa (63.60 Psi) displayed. Refer to Exploded View.
NO - GO TO 1.




Special Repair Requirement
1.CHECK TIRE PRESSURE
Check all tires for tire pressures. Refer to [1][2]Specifications.
Does all tire pressure data meet the specification?
YES - GO TO 2.
NO - Inspect or repair the tires or wheels and adjust the tire pressure to the specification.
2.PERFORM ID REGISTRATION
Perform ID registration. Refer to Special Repair Requirement.
- END