C1706

C1704, C1705, C1706, C1707 LOW TIRE PRESSURE





Description
When the tire pressure monitoring system detects low inflation pressure, the low tire pressure warning lamps in the combination meter comes on.




DTC Logic

DTC DETECTION LOGIC






DTC CONFIRMATION PROCEDURE
1.DTC REPRODUCTION PROCEDURE
With CONSULT-III
1. Drive for 3 minutes at a speed of 40 km/h (25 MPH) or more, then drive normally for 10 minutes.
2. Perform BCM (AIR PRESSURE MONITOR) self-diagnosis.
Is DTC "C1704", "C1705", "C1706", "C1707" detected?
YES - Perform trouble diagnosis. Refer to C1704.
NO - INSPECTION END




Diagnosis Procedure
1.CHECK TIRE PRESSURE
Check the internal pressure of all wheels. Refer to [1][2]Specifications.
Is the inspection result normal?
YES - Replace the DTC-detected malfunctioning transmitter. Refer to Exploded View.
NO - After adjusting the air pressure, GO TO 2.
2.CHECK TIRE PRESSURE SIGNAL
With CONSULT-III
1. Drive for 3 minutes at a speed of 40 km/h (25 MPH) or more, then drive normally for 10 minutes.
2. On "DATA MONITOR", select "AIR PRESS FL", "AIR PRESS FR", "AIR PRESS RR" and "AIR PRESS
RL", and check that the tire pressures match the standard value.






CAUTION:
Stop the vehicle and within 5 minutes, use CONSULT-III "DATA MONITOR" to display the tire pressure for all wheels.
Is the inspection result normal?
YES - Inspect or repair the tires or wheels and adjust the tire pressure to the specification.
NO - GO TO 1.




Special Repair Requirement
1.CHECK TIRE PRESSURE
Check all tires for tire pressures. Refer to [1][2]Specifications.
Does all tire pressure data meet the specification?
YES - GO TO 2.
NO - Inspect or repair the tires or wheels and adjust the tire pressure to the specification.
2.PERFORM ID REGISTRATION
Perform ID registration. Refer to Special Repair Requirement.
- END