System Specifications

Transaxle Remarks: -1st & 2nd double baulk ring type synchronizer -Reverse sub-gear	Number Of Speeds			5
	Synchromech Type			Warmer
	Gear Ratio		1st	3.333 To 1 (: 1)
			2nd	1.955 To 1 (: 1)
			3rd	1.286 To 1 (: 1)
			4th	0.926 To 1 (: 1)
			5th	0.756 To 1 (: 1)
			Reverse	3.214 To 1 (: 1)
	Number Of Teeth	Main Gear	1st	50
			2nd	43
			3rd	36
			4th	38
			5th	34
			Rev.	45
		Reverse Idler Gear		37
Final Gear	Final Gear Ratio			4.176 : 1
	Number Of Teeth	Final Gear/Pinion		71/17
		Side Gear/Pinion Mate Gear		14/10
Gear End Play	1st Main Gear		End Play	0.18 - 0.31 mm
	2nd Main Gear		End Play	0.18 - 0.31 mm
	5th Main Gear		End Play	0.18 - 0.31 mm
	Reverse Main Gear		End Play	0.18 - 0.31 mm
	3rd Input Gear		End Play	0.18 - 0.31 mm
	4th Input Gear		End Play	0.18 - 0.31 mm
Clearance Between Baulk Ring and Gear	3rd, 4th, 5th, Reverse Baulk Ring	3rd	Standard	0.90 - 1.45 mm
			Wear Limit	0.7 mm
		4th	Standard	0.90 - 1.45 mm
			Wear Limit	0.7 mm
		5th	Standard	0.90 - 1.45 mm
			Wear Limit	0.7 mm
		Reverse	Standard	0.9 - 1.35 mm
			Wear Limit	0.7 mm
	1st and 2nd Baulk Ring	Dimension A	Standard	0.6 - 0.8 mm
			Wear Limit	0.2 mm
		Dimension B	Standard	0.6 - 1.1 mm
			Wear Limit	0.2 mm