Without Scan Tool

WITHOUT CONSULT-II

After a malfunction is repaired, return to User mode from Diagnosis mode by switching the ignition "OFF" for at least 1 second, then back "ON". At that time, the self-diagnosis result is cleared.

HOW TO CHANGE SELF DIAGNOSIS MODE - Without CONSULT




From User Mode to Diagnosis Mode
Diagnosis mode activates only when a malfunction is detected, by pressing the driver's door switch at least 5 times within 7 seconds after turning the ignition "ON". SRS will not enter Diagnosis mode, if no malfunction is detected.

From Diagnosis Mode to User Mode
After a malfunction is repaired, switch the ignition "OFF" for at least one second, then back "ON". Diagnosis mode is returned to User mode. If switching Diagnosis mode to User mode is required while malfunction is being detected, switch the ignition "OFF", then back "ON" and press the driver's door switch at least 5 times within 7 seconds.