Side and Floor Trim

Component Location:

Component Views:

CAUTION: Wrap the tip of flat-bladed screwdriver with a cloth when removing metal clips from garnishes.

1. Remove front and rear seats. Refer to "FRONT SEAT" and "REAR SEAT" for details.
2. Remove front and rear seal belts. Refer to "SEAT BELTS".
3. Remove front and rear outer kicking plates.[B]
4. Remove front and rear inner kicking plates.[B]
5. Remove front and rear body side welts.
6. Remove dash side lower finishers.
7. Remove front pillar garnishes.[C]
8. Remove center pillar lower garnishes.[D]
9. Remove center pillar upper garnishes.
10. Remove rear pillar garnishes.[E]
11. Remove child anchor cover and child anchor bolt.[F]
(For high-mounted stop lamp, refer to detail [J].)
12. Remove rear parcel shelf.[H]
13. Remove seatback welt.
14. Remove seatback center finisher.
15. Remove seatback side finishers.