Tel Switch

When any of the TEL switches is pressed, the TEL switch which is combined with the multiplex transmitting unit sends operational commands to the IVCS unit. TEL switch has following three functions.
- Volume adjust
- Placing re-dial call
- Placing memorized call (The telephone numbers are stored in the handset. A maximum of 6 memories are operative.)

VOLUME Switch
Voice volume from the front RH speaker can be adjusted by using the VOLUME switch.

SEND/END Switch Operation
- When a call is received, press SEND/END switch to permit conversation.
- At the completion of the conversation, press the SEND/END switch to terminate the call.
- To re-dial the last phone number, press SEND/END switch.

MEMORY Switch Operation
- A maximum of 6 telephone numbers which stored in the memory of the handset can be dialed by MEMORY switch operation.
- The last phone number is erased if the ignition switch is turned off or if the INFINITI Communicator system has been activated.
- For the procedure to input telephone numbers, refer to the handset operation manual.
- To select memory 1 to 6, push MEMORY switch A or B. Every push on the switch changes the memory as follows.
SWITCH A: Memory 1 -> 2 -> 3 OFF
SWITCH B: Memory 4 -> 5 -> 6 OFF
After selecting memory, push SEND/END switch to make a call.

NOTE: Memory switches are not functional unless handset is installed.