Window Shade Switch: Service and Repair

Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the door trim (A) after removing the screws.








3. Remove the door trim garnish (A) after removing the screws inside the door trim.




4. Remove the rear curtain switch (A) after removing screws (3EA) and connector.






Installation

1. Install the rear curtain switch and connector.
2. Install the door trim garnish and door trim.
3. Connect the negative (-) battery terminal.

Inspection

1. Check for continuity between the terminals. If the continuity is not as specified, replace the rear curtain switch.

[IMS]





[NON-IMS]