Repair Procedures

Inspection

PDM Diagnosis With GDS
1. It will be able to diagnose defects of Smart key with GDS quickly. GDS can operates actuator forcefully, input/output value monitoring and self diagnosis.
2. Select model and "Smart key system(Button start)" menu if you want to check PDM.




3. Select "PDM" in the manu.




4. Select "Current Data", if you want to check current data of PDM.
It provides the input/output status of each module.




5. If you want to check PDM data operation forcefully, select "Actuation test".




Input/output Current Data





Actuation Test






ESCL OPEN STATUS CHECK
1. Select the "ESCL open status check" menu if you want to check ESCL open.














Removal

1. Disconnect the negative(-) battery terminal.
2. Remove the crash pad lower panel(A).





3. Disconnect the power distribution module(PDM) connector.
4. Remove the power distribution module(A) after loosening nut and bolt.






Installation

1. Install the power distribution module.
2. Install the crash pad lower panel.