Seat Temperature Element: Testing and Inspection
Inspection
1. Check for continuity and measure the resistance between No.1 and NO.2 terminals.
Standard value:2.43Ohms ± 10% / SET
(Cushion: 1.22Ohms ± 10%, Back: 1.21Ohms ± 10%)
Inspection
1. Check for continuity and measure the resistance between No.1 and NO.2 terminals.
Standard value:2.43Ohms ± 10% / SET
(Cushion: 1.22Ohms ± 10%, Back: 1.21Ohms ± 10%)