Power Door Lock Relay: Testing and Inspection

Inspection

1. Disconnect the negative (-) battery terminal.
2. Remove the junction box.
3. Check for continuity between the terminals.

Door Lock
1. There should be continuity between the No.2 terminal in the I/P-F and No.2 terminal in the I/P-E when power and ground are connected to the No.14 terminal in the I/P-E and No.1 terminal in the I/P-K.
2. There should be no continuity between the No.2 terminal in the I/P-F and No.2 terminal in the I/P-E when power is disconnected.









Door Unlock
1. There should be continuity between the No.3 terminal in the I/P-F and No.2 terminal in the I/P-E when power and ground are connected to the No.3 terminal in the I/P-E and No.1 terminal in the I/P-E.
2. There should be no continuity between the No.3 terminal in the I/P-F and No.2 terminal in the I/P-E when power is disconnected.