Entertainment Systems: Service and Repair

Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the console upper cover(A).




3. Remove the crash pad center fascia lower panel(A).




4. Remove the mounting screws.
5. Remove the connectors and cable(A) then remove the AVN head unit.






Installation

1. Connect the AVN head unit connectors and cables.
2. Install the AVN head unit.
3. Install the crash pad center fascia lower panel.
4. Install the console upper cover.
5. Check the AVN system.

NOTE:
Make sure the AVN head unit connectors are plugged in properly and the antenna cable is connected properly.