W/Harness Inspection

Engine Control
P0035 Turbocharger/Supercharger Bypass Valve Control Circuit High - Inspection/Repair:_:W/Harness Inspection

Terminal and Connector Inspection

1. Many malfunctions in the electrical system are caused by poor harness(es) and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
3. Has a problem been found?






Control Circuit Inspection

Check for short to power in control circuit
1. Ignition "OFF".
2. Disconnect RCV Control connector and ECM connector.
3. Ignition "ON".
4. Measure voltage between control terminal of the RCV Control harness connector and chassis ground.

Specification :0 V




5. Is Voltage within the specification?