Verification of Vehicle Repair

Airbag(Event #1)
B1490 PODS(Passenger Occupant Detecting System) Sensor(Bladder) Defect - Verification of Vehicle Repair

Verification of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.
1. Initialize PODS using scantool when replacing PODS ECU.
2. Connect scan tool and select "Diagnostic Trouble Codes(DTCs)" mode
3. Using a scan tool, clear the DTCs
4. Operate the vehicle within DTC Enable conditions in General information.
5. Are any DTC present ?