Rear Door Panel: Service and Repair

Replacement

Rear Door Trim Replacement

NOTE:
- Take care not to scratch the door trim and other parts.
- Put on gloves to protect your hands.

1. After loosening the mounting screw, then remove the inside handle housing (B).
2. After loosening the mounting screw, then remove the rear door trim (A).




3. Disconnect the power window connector (A).




4. Installation is the reverse of removal.

NOTE:
- Make sure connectors are connected properly and each rod is connected securely.
- Make sure the door locks/unlocks and opens/closes properly.
- Replace any damaged clips.