Transmission Drain & Refill Locations
Inspection1. Remove oil filler plug(A).
2. Check level with finger.
Oil level must be up to fill the hole, if not, add oil until it runs over.
3. Install filler plug with a new gasket.
Tightening torque :
60 - 80 Nm (6.0 - 8.0 kgf.m, 43.4 - 57.8 lb-ft)
Replacement
1. With the vehicle parked on a level surface, remove the drain plug.
2. Drain the transmission oil after loosening the drain plug (A).
3. Install the drain plug with new gasket.
Tightening torque :
60 - 80 Nm (6.0 - 8.0 kgf.m, 43.4 - 57.8 lb-ft)