Disassembly
Disassembly
1. Make a groove on head of the special bolt (A) by using a punch.
2. Use a screwdriver to remove the key lock assembly (B).
Tightening torque :
7 - 13N.m (0.7 - 1.3kgf.m, 5 - 9lb-ft)
Disassembly
1. Make a groove on head of the special bolt (A) by using a punch.
2. Use a screwdriver to remove the key lock assembly (B).
Tightening torque :
7 - 13N.m (0.7 - 1.3kgf.m, 5 - 9lb-ft)