Shift Cable: Service and Repair
ATM CONTROL CABLE REPLACEMENTREMOVAL
1. Remove the control cable to transaxle range switch mounting nut.
2. Remove the clip of the control cable.
3. Remove the console (Screw: 5EA)
4. Remove the control cable pin.
5. Remove the clip of the control cable by pressing it with the driver.
6. Remove the control cable mounting nuts (A).
7. Remove the mounting bolts of the cable of the lower dashboard side to remove the cable.
INSTALLATION
1. See the "Transaxle range switch and control cable adjustment". Adjustments
2. Installation is the reverse of removal.