Crankshaft, Engine

General
Crankshaft
Pin O.D. 45 mm (1.77 inch)
Journal O.D. 57 mm (2.244 inch)
Bend 0.03 mm (0.0012 inch) or less
Out-of-round, taper of journal and pin; 0.01 mm (0.0004 inch) or less
End play
Standard 0.06-0.260 mm (0.0023-0.010 inch)
Limit 0.30 mm (0.0118 inch)
Undersize rework dimension of pin
0.25 mm (0.010 inch) 44.725-44.740 mm (1.7608-1.7614 inch)
0.50 mm (0.020 inch) 44.475-44.490 mm (1.7509-1.7516 inch)
0.75 mm (0.030 inch) 44.225-44.240 mm (1.7411-1.7417 inch)
Undersize rework dimension of journal
0.25 mm (0.010 inch) 56.727-56.742 mm (2.2333-2.2339 inch)
0.50 mm (0.020 inch) 56.417-56.492 mm (2.2235-2.2240 inch)
0.75 mm (0.030 inch) 56.227-56.242 mm (2.2136-2.2142 inch)