Tires: Service and Repair

WHEEL ROTATION





1. Rotate the tires in the patterns illustrated.

NOTE: The temporary spare tire should not used in the wheel rotation.

CHECKING FOR PULL AND WANDER
1. If the steering pulls to one side, use the following wheel rotation procedure.





a. Switch the front right and front left tires, and perform the road test in order to confirm vehicle stability.





b. If the steering pulls to opposite side, switch the front and rear tires, and again perform the road test.





c. If the steering continues to pull to one side, switch the front right and left tires again, and again perform the road test.





d. If the steering continues to pull to the opposite side, replace the front wheels with new ones.