Manifold Pressure/Vacuum Sensor: Description and Operation

MANIFOLD ABSOLUTE PRESSURE SENSOR (MAP SENSOR)
The manifold absolute pressure (MAP) sensor is a pressure sensitive variable resistor. It measures changes in the intake manifold pressure which result from engine load and speed changes, and converts this to a voltage output. The MAP sensor is also used to measure barometric pressure at start up, and under certain conditions, allows the ECM to automatically adjust for different altitudes. The ECM supplies 5 volts to the MAP sensor and monitors the voltage on a signal line. The sensor provides a path to ground through its variable resistor. The MAP sensor in-put affects fuel delivery and ignition timing controls in the ECM.