Recall - A-Pillar Reinforcement Update: Overview
Group01 - RECALL BULLETINS
Number
02-01-010-1
Date
11-2002
Model
Accent 2000-2002
Subject
CAMPAIGN 055 REVISED - 2000-02 ACCENT 3 DOOR FRONT 'A' PILLAR BRACKETS
DESCRIPTION:
This TSB supersedes TSB # 02-01-010 to correct part number information.
Some 2000-2002 MY Accent 3-door vehicles may require installation of a bracket at the mid-position of the 'A'- pillar and replacement of the upper 'A'- pillar bracket assembly to further support the trim cover on both 'A'- pillars.
This bulletin describes the installation and replacement procedure of the upper and lower bracket assemblies located on the left and right 'A'- pillars.
VEHICLES AFFECTED:
^ Model: 2000-2002 ACCENT 3-door vehicles
^ Affected vehicle production date range: Produced through October 19, 2001
^ Affected VIN range: Produced through KMHCG35C92U184651
PARTS INFORMATION
RECOMMENDED TOOLS:
1. 10 mm Socket
2. Socket Wrench (fits socket)
3. Torque Wrench (fits socket) set at 27 - 36 lb.in (3-4 Nm)
4. Center Punch / Marker
5. 5 mm (13/64) drill bit and drill motor
6. Drill Stop (or length of fuel hose cut about 2" shorter than the drill bit)
7. Rivet Tool (Snap On # HPS2O2, Emhart Pop Powerlink 3O, or equivalent)
CAMPAIGN CLAIM INFORMATION
NOTE
Submit claims using the Campaign Claim Screen.